Eastsign Manual Espresso Machine

Eastsign offers the ultimate solution for hand-making delicious espresso in the wild and on-the-go.

With the compatibility of Nespresso (NS) capsules in the coffee holder, this portable coffee maker lets you enjoy rich and bold crema with a direct extraction press design. Now you can be your own barista and explore a world of flavour while on the go, no electricity needed.

This mini espresso machine has a dimension of 3 x 3 x 8 inches, weighing only 500g, making it a perfect camping gadget, car coffee maker or travel coffee maker. The compact size makes it easy to carry and store.

The Eastsign manual espresso machine is the adventurer’s partner, a perfect espresso machine for Nespresso pods, espresso press. Get this espresso machine now and experience the true taste of espresso anytime, anywhere.

Image: Eastsign

Steps for use:

Step 1: Insert Nespresso (NS) capsule

Place and press the Nespresso coffee capsule in the Nespresso capsule adaptor so the other side of capsule is punctured. You will hear the sound once the capsule is well installed.

Place the Nespresso capsule adaptor in the coffee holder base, and twist tight the coffee holder

Warning: To avoid risk of injury, do not put your fingers in the coffee holder as there is sharp needle inside.

Step 2: Install coffee holder

  1. Push and rotate the coffee holder against the bottom of water tank.
  2. Rotate anticlockwise to remove water tank lid
  3. Add your desire amount of hot water (Recommended temp. 91°C-95°C or 198°F-203°F) (Water Volume 2.4oz or 70ml is better)
  4. Place water tank lid back into water tank.

Warning:

1.To avoid hot water scalds, please make sure coffee holder is tightly enclosed

after placing capsule, and then lastly fill in hot water to water tank. Please don’t turn the coffee maker upside down after adding water as the water tank lid is not insulated.

Step 3: Release pump

  1. Place installed water tank and coffee holder on the top of the coffee cup
  2. Rotate the water pump stick anticlockwise to release it.

Step 4: Press and brew coffee

  1. Press water pump stick at a 2 seconds interval until the water tank is empty.
  2. Use your other hand to protect main body to prevent it from shaking while pressing.
  3. Make sure coffee is flowing out evenly.

Warning:

  1. To avoid hot water scalds, please don’t pull out the coffee holder with water still in the water tank. Wait 10 seconds to remove the coffee holder as there may be pressure remaining inside the coffee holder.

Tips:

  1. To optimise coffee brewing results, you can pre-heat the portable coffee maker by adding hot water and pump it out without adding coffee capsule.
  2. Gentle pressure can extract every ounce of rich-flavoured coffee.
  3. Once the water tank is emptied, continue several presses to drain out all fluid inside the portable coffee maker so there is no more coffee coming out of the coffee holder base.

How to clean:

  1. Dispose of used coffee capsule (ideally in a sustainable manner).
  2. Add clean water to water tank and press several times until water coming out is clean again.
  3. Disassemble portable coffee maker, rinse and clean all parts and place them to dry.

Note: The Nespresso coffee holder contains sharp needle, please handle with care!

Specification

Colour: Black

Material: PP

Weight: 1.1lb (500g )

Water Tank Capacity: 5.6oz (160ml)

Average Pressure: 9-20bar

Compatibility: Compatible with Nespresso capsules of 5-6g (compatible with Nespresso original pods or compatibles).

Item Dimension: 3 x 3 x 7.8 inches (8 x 8 x 20cm)

Big Coffee Cup: 8oz (240ml)

Expresso Cup: 2.8oz(80ml)

What’s in the box

Eastsign Coffee Maker x1

Nespresso Coffee Holder x1 (Coffee holder lid, Nespresso capsule adaptor,Coffee holder base included)

Storage Bag x1

Black Coffee Cup 8 oz (240ml) x1

Expresso Cup 2.8 oz(80ml) x1

User Manual x1

Customer reviews:

“When I first used it, I was amazed by how to use it. It’s too easy! And it’s good quality, strong and very easy to clean. […] Overall, if you’re looking for a solid cup of espresso and are especially concerned with portability, I don’t think you have to do more research. Go with this machine.”

“This model (NS) comes with a soft travel sleeve. It can be very protective. Nice and compact for easy transport. I found it works better with Nespresso capsules. The own glass cup is a nice touch. Stainless steel pump mechanism, water tank and chamber. Everything feels premium!

“If you’re interested in the product, here is essay of tips:

  1. Make sure to use boiling hot water. The hotter the water, the better the coffee.
  2. Make sure the glass cup that collects the coffee is hot. Preheat the cup by pouring hot water in it. If the glass is cold, the coffee will be lukewarm.
  3. When uncapping the lid/pump, be careful. There is pressure in the chamber still and the top may pop up and some left over water may spray out. Make sure to pump the excess water out of the pump.
  4. The nozzles and holes are very easy to clean.
  5. There are sharp blades in the area where the coffee capsules and you need to be careful not to hurt your finger while cleaning, even if the area only need to rinse it with water.”

For more information, visit: eastsign.com.

Back to the Tea & Coffee Trade Journal Marketplace

Related content

Leave a reply

Tea & Coffee Trade Journal